Effective Washing Of Natural And Crushed Materials
Log washers are very high energy units designed to disintegrate tough clay particles. With longer wash tubs they provide significantly increased retention time. Retention can further be increased by switching to straight paddle design and higher working angles. All AGGRETEK Log washers are provided with spray bars to make a final rinse before the product leaves the wash box.
Two intermeshing shafts dressed with abrasion resistant, corrugated paddles, timed with a dual output gearbox work together to:
1. Scrub faces of rocks to remove sticky clays over the faces of rocks
2. Crush softer clays and agglomerated particles to remove them with the reverse current flow. As rocks flow through the washing tub they are beaten repeatedly by the paddles to provide thoroughly clean end-product.
WHY AGGRETEK LOG WASHERS?
A Log washer is subject to extreme stresses over its lifetime. AGGRETEK Log Washers are strengthened in three key points:
TUB Design: AGGRETEK Log Washers are structurally strengthened to deal with year of hard use. Under heavy loads it retains its rigidity and provides longer bearing lifetime.
Shafts: Shafts are machined to fine tolerances. Extremely thick, one piece shafts are designed to stand for the test of time.
Gearbox: This gearbox, specifically designed for Log Washer units is designed to stand extreme shock loads. It also locks both shafts to their positions, precisely controlling their timing.
MODELS & SPECIFICATIONS
|Dimensions||36" x 30'||36" x 35'||44" x 30'||48" x 35'|
|Dimensions (mm)||905 x 8700||905 x 10668||44" x 30'||48" x 35'|
CRUSH - SCREEN - WASH - MOVE - REPEAT
AGGREGATE TECHNOLOGIES GROUP
150 Isidor Ct. Suite 103
Sparks, Nevada 89441
Dealer Relations Division
PURCHASING / LOGISTICS
Office: 775-686-6900 ext. 125
Office: 775-686-6900 ext. 123
Office: +1 775-223-9441